제주대학교 Repository

SLS 공정효율 향상을 위한 DSP 제어기반의 레이저 주사경로 생성

Metadata Downloads
Alternative Title
Laser Scan Path Generation of DSP control base for SLS Progress efficiency Improvement
Abstract
Rapid Prototyping(RP) technology has been applied in many industrial areas such as modeling shape verification, prototype, application of a metal and a ceramic part, concurrent engineering, medical devices, and micro machines. These application areas has been expanded with producing and suppling RP machines to have newly developed technologies. The laser scanning system sinters the powder by laser path control, which is one of major components for development of SLS(Selective Laser Sintering) machine. It is comprised of a laser source, optics, a scanning mirror, and etc.
Since affecting the precision of whole machine and fabricating speed, this system needs to be designed with stability and superior fabrication precision and speed.
The laser part also needs to be set up with minimum influence of environment and keeps optimal beam diameter and stable state. Optics such as reflecting mirrors and beam expander needs to be set up properly and aligned high precisely to control accurate beam path. The scanning mirror to control laser scanning path needs to be operated with high, uniform and precise speed. And above mentioned hardware component require each control software including path generation algorithm.
Author(s)
김형찬
Issued Date
2008
Awarded Date
2008. 2
Type
Dissertation
URI
http://dcoll.jejunu.ac.kr/jsp/common/DcLoOrgPer.jsp?sItemId=000000004248
Alternative Author(s)
Kim, Hyung-Chan
Affiliation
제주대학교 대학원
Department
대학원 전기전자공학과
Advisor
도양회
Table Of Contents
Summary = 1
Ⅰ. 서론 = 2
Ⅱ. 주사경로 생성 알고리즘 = 4
1. SLS 공정장비의 특징 = 4
2. 주사경로 생성 알고리즘 개발 = 6
3. 임의 방향의 주사점 생성 = 10
4. 주사경로 제어 = 12
5. 주사경로의 보정 = 13
6. 주사경로 생성 알고리즘의 구현 방안 = 16
Ⅲ. 공정효율 향상을 위한 주사경로 생성 = 22
1. 영역분할 주사경로 알고리즘 개발 = 22
1) 영역분할 주사경로 효율 = 22
2) 영역분할 주사경로 알고리즘 개발 = 23
2. 오류 검증 알고리즘 개발 = 25
3. 주사시간을 고려한 영역분할 주사경로 생성 알고리즘 = 26
4. 디지털 미러 시스템(Digital mirror system) = 28
1) 디지털 미러 시스템의 개요 = 28
2) 디지털 미러 시스템의 적용 = 29
3) 디지털 미러 시스템의 공정조건 = 30
Ⅳ. 시뮬레이션, 공정 및 평가 = 33
1. 공정 및 평가 장비 = 33
1) SLS 임의형상제작 시스템 = 33
2) 공정 변수 = 35
2. 주사경로 생성 및 제어 알고리즘을 적용한 소프트웨어 개발 = 36
1) 공정 프로그램의 개요 = 36
2) 공정 프로그램의 특징 = 38
3. 시뮬레이터의 개발 = 39
1) Layer Viewer의 개발 = 39
2) 공정시간 시뮬레이터의 개발 = 40
3) 기본 공정의 시간 시뮬레이션 = 41
4) 디지털 미러 시스템의 주사시간 시뮬레이션 = 42
4. 공정 실험 = 44
1) 영역분할, 시간을 고려한 영역분할 주사경로 생성 알고리즘 공정실험 = 44
2) 디지털 미러 시스템을 적용한 공정 실험 = 46
Ⅴ. 결론 = 49
참고 문헌 = 51
Degree
Master
Publisher
제주대학교 대학원
Citation
김형찬. (2008). SLS 공정효율 향상을 위한 DSP 제어기반의 레이저 주사경로 생성
Appears in Collections:
Faculty of Applied Energy System > Electronic Engineering
공개 및 라이선스
  • 공개 구분공개
파일 목록

Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.