제주대학교 Repository

신재생 하이브리드 발전시스템의 최적 용량 설계에 관한 연구

Metadata Downloads
Abstract
With the increasing use of fossil fuels, the problem of global warming is intensifying all over the world. One of its main hazards is the destruction of the Eco-system. One way to solve this problem is the use of Natural Renewable Energy resources instead of hydrocarbon fuels. Therefore the upcoming energy environment on domestic and foreign horizon expects new challenges and variety.
Since solar, wind and tidal energies mainly depend upon statistical parameters with respect to changing climate and environment, focus on hybrid system design increases the availability of the power generation system. It also reduces the dependence on one environment parameter thus providing the consumer with reliable and cheap electricity. Therefore optimal capacity design of hybrid generation system considering the battery has a very important role in the use of renewable energy effectively and economically.
Hybrid generation system basically consists of merging system of two or more different types of generation systems. Hybrid Generation System is more effective than utilization of single renewable energy source. Several approaches were developed to achieve the optimal configurations of the hybrid systems such as the least square method, the trade-off method and the probabilistic approach method.
In this study, we present a methodology to perform the optimal sizing of a new and renewable hybrid generation system. The methodoloy aims at finding the configuration, among a set of system components, that meets the desired system requirements, with the lowest value of the energy cost, The availability of the methodolgy is demonstrated with the field data acquired from sets of experiments
Author(s)
박근현
Issued Date
2011
Type
Dissertation
URI
http://dcoll.jejunu.ac.kr/jsp/common/DcLoOrgPer.jsp?sItemId=000000005394
Alternative Author(s)
Park, Kun Hyun
Affiliation
제주대학교
Department
대학원 메카트로닉스공학과
Advisor
강철웅
Table Of Contents
제 1 장 서론 3
1.1 신재생에너지의 필요성 3
1.2 하이브리드발전의 필요성 4
1.3 최적용량설계 필요성 및 중요성 4
1.4 관련 기존연구내용 5
1.5 본 연구 내용 6
제 2 장 하이브리드 발전 시스템 최적용량설계 7
제 1 절 발전시스템 개요 7
1.1 풍력발전시스템 7
1.2 태양광발전시스템 15
제 2 절 단위 발전시스템 출력 모델링 28
2.1 풍력발전출력 모델링 28
2.2 태양광 발전 출력 모델링 30
2.3 축전시스템 모델링 32
제 3 절 최적 용량설계 모델 33
3.1 전력부족률 기반 최적설계 모델 33
3.2 경제성 모델 37
3.2.1 LCE 기반 경제성 모델 37
3.2.2 발전 단가 기반 경제성 모델 38
제 3 장 결과 및 고찰 40
제 1 절 시뮬레이션 결과 40
1.1 풍력-태양광 하이브리드 발전결과 43
제 2 절 실험결과 44
2.1 데이터 실측 44
2.2 실험장치 구성 45
2.3 실험결과 50
제 4 장 결론 54
참고문헌 55
Degree
Master
Publisher
제주대학교 대학원
Citation
박근현. (2011). 신재생 하이브리드 발전시스템의 최적 용량 설계에 관한 연구
Appears in Collections:
Faculty of Applied Energy System > Mechatronics Engineering
공개 및 라이선스
  • 공개 구분공개
파일 목록

Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.